Setting Up a Flat Network with Openstack Neutron

This setup will allow the VMs to use an existing network. In this example, eth2 is connected to this pre-existing network (192.168.1.0/24) that we want to use for the OpenStack VMs.

All the configuration is done in the node dedicated to Nova Networking.

1. Set up the Open vSwitch bridge:

# ovs-vsctl add-br br-eth2
# ovs-vsctl add-port br-eth2 eth2

2. Set up /etc/network/interfaces (node’s IP is 192.168.1.7):

auto eth2
iface eth2 inet manual
up ifconfig $IFACE 0.0.0.0 up
up ip link set $IFACE promisc on
down ip link set $IFACE promisc off
down ifconfig $IFACE down

auto br-eth2
iface br-eth2 inet static
address 192.168.1.7
netmask 255.255.255.0

3. Tell Open vSwitch to use the bridge connected to eth2 (br-eth2) and map physnet1 to it /etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini:

[ovs]
network_vlan_ranges = physnet1
bridge_mappings = physnet1:br-eth2

4. Tell Neutron to not to use the metadata proxy in /etc/nova/nova.conf (otherwise you get a HTTP 400 when querying the metadata service):

service_neutron_metadata_proxy=false

Note that the metadata service is managed by Neutron as usual via the neutron-metadata-agent service anyway.

5. Create the network telling to use the physnet1 mapped above to br-eth2:

# neutron net-create flat-provider-network --shared  --provider:network_type flat --provider:physical_network physnet1

6. Create the subnet:

# neutron subnet-create --name flat-provider-subnet --gateway 192.168.1.5 --dns-nameserver 192.168.1.254  --allocation-pool start=192.168.2.100,end=192.168.2.150  flat-provider-network 192.168.2.0/24

That’s it. Now VMs will get an IP of the specified range and will be directly connected to our network via Open vSwitch.

About virtuallylg

Hello, my name is Lorenzo Galelli, I have been working with availability and virtualization solutions for Symantec for over a decade now and its amazing to see the impact virtualization has brought to the world of IT. During my time at Symantec I have worked as a systems engineer for customers big and small and seen a vast array of different virtualization projects. I am currently Technical Product Manager for ApplicationHA for VMware and KVM and I also have focus on VDI especially with Symantec's VirtualStore and FileStore technologies. Follow my blog for all things Symantec and virtualization. Opinions expressed here are my own.
This entry was posted in Openstack. Bookmark the permalink.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s